Using cam buckles is an alternative to using ratchet straps. Cam buckles are designed for smaller applications and are used to protect more fragile goods. Since the cam buckle can only be tightened as much as possible within the scope of your strength, there is less risk of damage to the cargo due to over-tightening.
The heavy-duty cam buckle strap is made of wear-resistant polyester webbing, which is very suitable for securing goods on pallets, trailers, or truck beds. They can also be used in homes, shops, garages, farms, etc.
How to use a cam buckle strap？
1.Secure the end of the strap, or if using an endless cam buckle, wrap the length of the webbing around the item to be secured.
2. Hold the webbing in one hand and the buckle in the other hand, press down the horizontal surface of the buckle with your thumb, and then pass the webbing through the groove at the bottom of the buckle.
3.While pressing the thumb release button, pull the strap to the desired tension and then release it.
To remove the watch strap, just press the thumb button and pull the watch strap.
Notice:
If you secure a box or other cargo that may be damaged, you can use a corner protector. After fixing, make sure that there is no loose webbing to prevent shaking during transportation and reduce the risk of tripping or webbing jammed by moving parts.
If you use cam buckles to fasten the back of the truck or the cargo on the trailer, check that all fastening devices are secure before you go. Then check again after driving a distance to make sure there is no looseness.
If you use cam buckles to fix the goods on the pallet, be sure to pass the webbing through the pallet body from one side to avoid damage by the forklift when lifting the pallet. Make sure that the buckle is on the top of the item, not on the side, as it needs to be on a flat surface to get the required tension.
Be sure to follow these cam buckle instructions to ensure the safe and effective securing of your load.
